Drivers For Sony
Home> Download hp Drivers> Download sp27326.exe Drivers

Real Free Download HP sp27326.exe driver file

We Provide Real download link for sp27326.exe driver file, you can download official hp sp27326.exe drivers files free here, driver file size:11.1 MB, Just download sp27326.exe driver files for your hp device now!


sp27326.exe driver file free for hp

Driver File Name sp27326.exe
Device Type Microsoft Windows XP Fix for Messenger Service Vulnerability (Q828035, 828749)
media Type Electronic
File Description HOW TO USE:
  1. Download the SoftPaq .EXE file to a directory on your hard drive.
  2. Execute the downloaded file and follow the on-screen instructions.
  3. Place the firmware image file (cpqia151.bin) on an FTP, HTTP, or TFTP server that is network-accessible from the Integrated Administrator that you want to update.
  4. Using Telnet, SecureSH, or a serial terminal, login as the Administrator on the Integrated Administrator that you want to update.
  5. At the ''>'' prompt, type the following command:UPDATE IMAGE < url > Where < url > can be any of the following items:http://host/path ftp://host/path ftp://username:password@host/path tftp://host/path NOTE: In the previously listed items, ''host'' is a fully qualified domain name or IP address, and ''path'' is the pathname of the flash image to download, usually cpqia151.bin.
  6. Type ''yes'' to confirm the flash update operation. The Integrated Administrator prompts all users to log off, then waits one minute, and then downloads the image file, verifies the image file, and finally re-programs its flash memory. Do not Power Off or reset the enclosure during this process. If the flash programming process is successful, the Integrated Administrator automatically restarts (reboots).
NOTE: The Integrated Administrator firmware update process (including a restart) will not affect the operation of any server blades that may be running within the enclosure. If you are upgrading from Version 1.11 or earlier, the Integrated Administrator (after restarting) will temporarily lose access to server blade information (such as server name, MAC addresses, processor, memory, and so forth) until the next time each server blade is rebooted. For additional information, refer to the user guide for the Integrated Administrator, which is located at:ftp://ftp.compaq.com/pub/supportinformation/techpubs/user_reference_guides/24907 0-005_rev5_us.pdf MD5 CHECKSUM: MD5 (cpqia151.bin) = e1ca81953ddc5a571026e884dea2
Release Date Feb 08, 2005
Update Date Jul 15, 2016
Version 1.00 B
OS: Windows 7 (64-bit) etc..
Download Download Free Now

HOW TO USE:
  1. Download the SoftPaq .EXE file to a directory on your hard drive.
  2. Execute the downloaded file and follow the on-screen instructions.
  3. Place the firmware image file (cpqia151.bin) on an FTP, HTTP, or TFTP server that is network-accessible from the Integrated Administrator that you want to update.
  4. Using Telnet, SecureSH, or a serial terminal, login as the Administrator on the Integrated Administrator that you want to update.
  5. At the ''>'' prompt, type the following command:UPDATE IMAGE < url > Where < url > can be any of the following items:http://host/path ftp://host/path ftp://username:password@host/path tftp://host/path NOTE: In the previously listed items, ''host'' is a fully qualified domain name or IP address, and ''path'' is the pathname of the flash image to download, usually cpqia151.bin.
  6. Type ''yes'' to confirm the flash update operation. The Integrated Administrator prompts all users to log off, then waits one minute, and then downl