Real Free Download HP 6800_enu_win2k_xp.exe driver file

Note: Windows XP users with the built-in Internet Connection Firewall may ignore this warning.

During the software installation, the HP Deskjet 6800 series network installer fails to locate the printer on the network. The error message, "Setup was unable to detect any printers on the network" appears. To prevent this issue from occurring, you must temporarily disable your firewall before you install the HP Deskjet 6800 series printer software.

Consult the documentation that came with your firewall for help in disabling it. Some firewalls may require further configuration after printer installation in order for the printer to be made available on the network.

Whenever the firewall is disabled, HP strongly recommends that the following items be installed on your computer:

• A hardware device that provides firewall protection between the Internet and your computer, such as a gateway
• An up-to-date antivirus software program

Some computers have multiple network connections (such as one connection for a local area network, and another connection for a wireless network). Disable each network connection's firewall.

1. Set up printer hardware
   1. Plug power cord into power adapter and power adapter into printer. Plug power cord into outlet.
   2. Turn printer on.
   3. Load white paper.
   4. Ensure output tray is lowered.
   5. Open front cover
   6. Pull pink tab to remove clear tape from print cartridges. Do not touch copper strip.
   7. Wait until cradle is idle. Insert print cartridges then close latches.
   8. Close front cover.
2. Connect to printer

   If you are using Windows 2000 with any firewall or Windows XP wi